if you own Samsung J120G Smartphone having FRP lock issue then you’re on an accurate Place. Here we have a tendency to Share a Step by Step Guide how to FRP lock unlock bypass on Samsung J120G with Odin Tool. There no need full flash, no need dead risk Download FRP Reset files without password. We have listed the Samsung J120G FRP Reset below. If you find any error please comment us below.
What is FRP/Factory Reset Protection?
Factory Reset Protection (FRP), could be a security feature on Android devices with Lollipop 5.1 and higher version. FRP is automatically activated when you set up a Google Account (Gmail) on Your Android device. Once FRP is activated, it prevents the use of an Android device after a factory data reset, until you log in using a Google username.
How To Reset FRP Lock/Gmail Account on Samsung J120G:
- Unlocking the bootloader will Erase all of your data. make sure backup of Your Personal Data. Like Contact Msg’s etc.
- Please do Carefully, We are not Responsible for any damage your Android device, bootloop, or dead SD card’s.
- Ensure that Your device at-least 50-60% charge During Process. to Stop the Accidentally Shut Down.
Step 1: Download and install Samsung USB Driver on your pc. In case you have already installed the Samsung USB Driver on your pc then SKIP this step.
Step 2: Download the latest Firmware compatible with your device or if you have already download the firmware then ignore downloading again. and extract it on your pc.
Step 3: Power Off your Samsung android device.
Step 4: Now, you have to boot into Download Mode on your device. To boot into Download Mode: Press and Hold Volume Down button, Home Key, and Power Key. When the phone vibrates Leave the Power button but Keep holding the Volume Down button and the Home key. You will boot into the Download Mode.
Step 5: In the Download mode you will see a Warning Yellow Sign. In this situation, you have to press the Volume up button to continue.
Step 6: Now, Open Odin Tool and connect your Samsung Android device to the pc. Once you have connected the phone to the pc, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
Step 7: Once your device detected by the Odin tool, click on the AP button and select the firmware AP button and select the .tar .md5 file that you have extracted in Step 2.
Step 8: Then, click on the ‘‘Start” button in Odin Tool to begin the Flashing process.
Step 9: Once you see, the Green Pass Message now remove the USB cable from the Samsung Android device (during this process, your device will restart automatically).
Step 10: If it is not an automatic reset, then it may be manually reset the phone. For factory, data reset Press and Hold Volume UP key, Home Key, Power Key. When the phone vibrates Leave the Power Key but Keep holding the Volume UP Key and the Home key. You will boot into the Recovery Mode.
Step 11: In Recovery Mode, Wipe Data/factory reset.
Step 12: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.
Step 13: Now, your Samsung Android Device FRP Unlocked will restart without any issue.
[This process is 100% safe. But if you do anything wrong and got bricked your device then any of us are not responsible for your action. We can only give you a suggestion, nothing more.]
All device names, logos, and brands are the property of their respective owners. All company, device and service names used in this Blog are for identification and learning purposes only.
Stay with Gsm Flash Rom for how to downloading installing any Android phone’s official firmware/flash file fully free.